This cutting machine is equipped with a tungsten carbide mobile knife to cut hard materials such as glass, carbon and aramid fibers.

Cutting width : 280 mm (+/- 11") effective for a 700 mm (+/- 28") table infeed width.

Acceptable compressed material thickness : from 30 mm (+/- 1.2") to 50 mm (+/- 2") according to the type of material.

Maximum material thickness at infeed : +/- 100 mm (+/- 4") according to material compressibility.

Cutting speed : 400 cuts/min.

Range of cutting lengths : from 6 mm (+/- 0.2") to 160 mm (+/- 6").

Production varies according to the material, cutting length, loading, ..., and may reach over 1,000 kg/hour (2,200 Lbs/hour).

The cutting machine is driven by a three phase enclosed motor with cooled housing and IP 54 protection.