Guillotine cutting machine for soft material

Processed material	Machine type(s)	Time
Fishnets	N45	2'10''
Raffia	N45	0'22''
Synthetic hair fiber	N45	1'40''
PP (Fiber)	N45	0'25''
Gloves and workwear (Destruction)	N45	0'21''
Hemp (Fiber)	G45L	1'10''
Cotton waste (Various)	N45 + CO25 + S45	0'58''
Cotton waste (Various)	N45 + CO25 + S45	0'46''
Foam	G45L + G45L	0'37''
Hemp (Straw)	G45L + G45L	1'33''
Quilt edges	G45L + G45L	0'31''

Comparative chart

Model	Cutting width	Cutting lengths range	Cutting speed	Compressed material thickness	Total installed power (50 Hz)	Soft material	Special fibers
						• Man-made fibers (PP, PES, PA, …) • Natural fibers (cotton, flax, wool, sisal, …) • Textile waste (old cloth, …) • Plastic films (PP, PE, PES, …) • …	• Glass • Carbon • Aramid • Basalt • Stainless steel • Dyneema® • Spectra® • …
S45	450 mm	6 - 150 mm	300 cuts/min.	75 mm	4 Kw
N45	450 mm	3 - 125 mm	405 cuts/min.	75 mm	7.1 Kw
R45	450 mm	3 - 125 mm	380 cuts/min.	75 mm	10.8 Kw
N60	600 mm	4 - 118 mm	290 cuts/min.	125 mm	13 Kw
CT60N	600 mm	5 - 360 mm	250 cuts/min.	180 mm	25.5 Kw
P26	260 mm	0.1 - 8 mm	85 - 400 cuts/min.	2 - 40 mm	16 Kw

Cutting width : 450 mm (+/- 18”) effective for a 830 mm (+/- 33”) table infeed width.
Acceptable compressed material thickness : 75 mm (+/- 3”) according to the type of material.
Maximum material thickness at infeed : +/- 200 mm (+/- 8”) according to material compressibility.
Cutting speed : 405 cuts/min.
Range of cutting lengths : from 6 mm (+/- 0.2”) to 125 mm (+/- 5”). From 3 mm (+/- 0.1”) as an option.
Production varies according to the material, cutting length, loading, ..., and may reach over 1,500 kg/hour (3,300 Lbs/hour).
The cutting machine is driven by two three phase asynchronous motors with IP55 protection.

Simple, accurate knife adjustment via two detachable handles located on the front panel of the machine.
Quick and separate rolls adjustment to enable a suitable infeed gap for the materials to be cut.
Quick cutting length adjustment by frequency inverter.

Minor wear of the cutting edge can be taken up in seconds while the machine is working.
All PIERRET knives are straight and can be sharpened on a separate grinding machine, ideally one manufactured by PIERRET. The mobile knife is double-sided.
A control station used to control the machine functions is centrally located. The user can therefore work from the right- or the left-hand side of the machine.
Quick dismounting of the feed table.
A special feed table design totally eliminates penetration of foreign material between the conveyor belt and the sides.
The cutting machine is mounted on retractable wheels.
The feeding may be reversed by the simple push of a button.
Easy to clean under the feeding belt.
Easy to clean the inside of the machine.
Easy access to the entire transmission of the machine.

The material is conveyed on a feeding belt to an awaiting hardened steel roll assembly. The rolls compress the material on the feed table and draw it efficiently towards the knives.
The scissor effect produced between the mobile knife and the fixed knife guarantees a clean edged, melt-free cut, easily and accurately.
The roll adjustments enable a trouble-free feeding of materials of various types and shapes.
Automatic feeding shutdown in over thickness conditions with withdrawal facility by feeding reversal.
The machine stops automatically in case of a material wrap-up.